Services

Dynamic Simulation Modelling (level 5)

Level 5 commercial buildings are considered to be the most complex buildings to produce energy assessments for. A Level 5 non-domestic property can be identified from specific features such as atrium’s, automatic blind control and ventilation with enhanced thermal coupling. It is illegal to deliberately lodge a level 4 EPC against a level 5 building.

read more
BRUKL Reports (SBEM Calculations)

SBEM Calculations (also known as BRUKL Reports) provide an analysis of the predicted energy performance of a building and are required by Building Regulations to comply with the Part L section of the regulations. When the building is complete our reports can be converted to a lodged Commercial EPC.

read more
Asbestos Management Surveys

The purpose of the Asbestos Management Survey is to locate and identify the presence and extent of any suspect asbestos containing materials (ACMs) in the building which could be damaged or disturbed during normal occupancy, including foreseeable maintenance and installation, and to assess their condition.

read more
Display Energy Certificates

Display Energy Certificates are are legal requirement for all public body occupied buildings where the building has a total floor area > 250 m2. If there are multiple buildings on the same site (e.g. a school or hospital) then certificates will be required for each separate building (i.e. unconnected by covered walkways as a minimum).

read more
Commercial EPCs

To ensure our EPCs are accurate and audit compliant we use DesignBuilder for all our thermal modelling. This means our EPCs are much quicker to produce and often deliver a higher rating than certificates produced using the free government issue iSBEM used by the majority of active assessors.

read more